High-quality, easy-care and washable special film
UV protection laminated and colour intensiv.
Suitable for interior- and outdoor installation.
Easy to secure onto any door using the enclosed double-sided adhesive tape..
Includes fastening strap for attaching on your interior door.
To affix door films to exterior doors, we recommend using additional weather-resistant securing tape, which you can add to your basket in the Accessories section.
Pour plus d’informations, merci de consulter FAQ.
✔ easy to affix without bubbling
✔ removable at any time without leaving a trace
✔ UV protection laminated and colour intensive
✔ high-quality and vividly colored
✔ includes complete installation kit
Your individual motifs can also be produced on our garage tarpaulins.
To do this, please use the photo uploader in the area
Desired design.
The door billboards are available in three different sizes:
Size in feet: 2,7 feet x 6,7 feet (Width x Height)
Size in inch: 33,4 inch x 80,7 (Width x Height)
Size in feet: 2,9 feet x 6,8 feet (Width x Height)
Size in inch: 35,4 inch x 82,6 (Width x Height)
Size in feet: 3,2 feet x 6,8 feet (Width x Height)
Size in inch: 39,3 inch x 82,6 (Width x Height)
Special sizes
We don't have the right size for you? Then just tell us your specific size via
mail
Please note that the door billboards are designed for use only with smooth internal doors. Any kind of door material is suitable.
If you nonetheless wish to use the door billboard on an external door which is protected from the weather, we recommend that you seal the edges of the film (e.g. using transparent adhesive tape in order to protect the rear of the film from damp penetration.)
To fit your door billboard, you will need:
Around 15 - 30 minutes (plus 15 minutes waiting time), possibly someone to help you. A measuring tape or ruler, a felt pen, a cutter, cleaning agent, e.g. spirits dry cleaning cloth, screwdriver
Assembly for doors

Remove the door handle

Measure the internal door

Unpack and spread out the motif

Cut the motif and adhesive tape to size

Clean the edges of the internal door

Fix the adhesive tape to the door

Attach the door billboard to the internal door

Mark the position of the door handle and cut an aperture for it

Finished!
Assembly instructions
No review available for this item.